AMGO Hydraulics OHX-10 10,000 lb Two-post Car Lift
10,000 lb two-post lift, clear-floor, asymmetric arms. AMGO Hydraulics.
$3,695 guide price
Daytona Lifts · LTPA10
10,000 lb two-post lift, floor-plate, symmetric arms. Daytona Lifts.
$3,395 guide price
Launching soon
This model is part of our launch range. Tell us your ceiling height and delivery ZIP and we will confirm price, freight and lead time by email before you commit to anything.
Every lift here ships by freight, not parcel — the smallest model in our range still crates at several hundred pounds. We confirm the freight cost, the liftgate requirement and the delivery date in writing before any order is accepted, never a flat published rate.
Rated to 10,000 lb, this is a two-post configuration: the vehicle sits on swing arms between two columns and comes off the ground on all four wheels, which is what opens the underside for brake, suspension, exhaust and driveline work that a drive-on lift cannot reach as cleanly.
The arms are symmetric — equal length, centring the vehicle between the columns. That loads both sides evenly, which is the safer bet on a long-wheelbase truck or van, at the cost of less clearance to walk past the vehicle once it is raised.
Floor-plate: the equalisation cable runs through a channel across the floor rather than overhead, which buys back roughly a foot of ceiling height compared with a clear-floor design of the same capacity — worth knowing if your garage is tight overhead.
Like every two-post lift, this one anchors into your slab and needs the ceiling height to clear the raised vehicle plus the overhead assembly. Neither is a detail you settle after delivery — check both against the specification table before you order.
| Lift Type | Two-post |
|---|---|
| Lifting capacity | 10,000 lbs |
| Drive-through clearance | 88.6" (7ft 4.6in) · |
| Overall width | 126.8" (10ft 6.8in) · |
| Asymmetric arms | No · |
| Clear floor (no base plate) | No · |
| Minimum concrete thickness | 8" · |
| Voltage | 240 V ·· |
| Phase | 1 phase ·· |
| Motor | 3 hp · |
| ALI certification | Claimed by 1 source, unverified by us — a claim is not a certificate; we are checking the directory ALI directory |
| SKU | DAYTONA-LTPA10 |
| Brand | Daytona Lifts |
| Model | LTPA10 |
· stated by one retailer, unconfirmed · ·· stated identically by two or more retailers. Anything not listed is a figure we do not hold, and we would rather show a gap than a plausible number. Every specification is confirmed against the manufacturer's manual before an order is accepted.
We do not yet hold a manufacturer-stated ceiling height for this exact model. Use the calculator above as a first filter and ask us for the manufacturer figure before you order — we will not guess at a number that decides whether a lift fits.
Runs on 240V. That is a dedicated single-phase circuit for most home garages, not an outlet you already have — budget an electrician unless you already run a welder or compressor off the same panel.
10,000 lb is the total rated capacity, not a figure per arm. Check it against the curb weight of the heaviest vehicle you actually own — not the lightest — including anything you routinely carry, like a truck canopy or a loaded bed.
A 2-post lift has one prerequisite every other spec is downstream of: does the overhead assembly clear your ceiling with the vehicle raised. Enter your ceiling height and your tallest vehicle and see what is actually left to work with.
10,000 lb is the lift's total rated capacity, not a per-arm figure. Check it against the actual curb weight of the heaviest vehicle you own, including anything you regularly carry — a modern crew-cab truck or full-size SUV can sit closer to this number than the badge on the door suggests.
240V, 1-phase. If that is 208-230V, treat it as a dedicated circuit and an electrician's visit, not an existing garage outlet.
Yes — every two-post lift anchors into the slab, this one included. We do not yet hold the confirmed concrete specification for this exact model; ask us and we will confirm it from the manufacturer's installation manual before you order.
10,000 lb two-post lift, clear-floor, asymmetric arms. AMGO Hydraulics.
$3,695 guide price
10,000 lb two-post lift, clear-floor, asymmetric arms. AMGO Hydraulics.
$4,295 guide price
10,000 lb two-post lift, clear-floor, symmetric arms. AMGO Hydraulics.
$3,695 guide price
10,000 lb two-post lift, clear-floor, asymmetric arms. AMGO Hydraulics.
$4,395 guide price
Two-post only. Every price sourced from current dealer listings, every spec gap disclosed.